How to protect your roof from ice dams?

2


As the winter season brings us joy and relief from the scorching heat of the sun it also brings low temperatures and snow storms. Snow storms are the reason of the formation of ice dams, ice dams are hump of snow which forms on the roof edge. Ice dams are risky they can damage the roof as well as the interior of the house. Gutters and downspouts are also at stake because of these ice dams. The risk contrived by ice dams can be prevented with precautions. Apart from all the methods to prevent damage the best cure is proper ventilation and insulation in the attic.


How ice dams are formed?

Ice dams are formed when the temperature of the roof over the attic increases and melts the snow underside of the roof. The water travels down all the way between the snow and shingles and enters the eave of the roof. This water stays cool there and turns into ice because of its freezing temperature. The roofs with flat pitch have more chances of ice dams. Even the snow and ice can be piled up in the gutter near the eaves. One of the main keys to protect your new roof from ice dams is to keep the roof cold; a cold roof gives an extra layer of protection in winters. A warmer roof allows the snow to melt on the edge of the roof. Here are some steps which will let you enjoy your winter free from ice dams and require less energy for performance.

Related: Facts about corrugated metal roof

Proper ventilation to ridge and eaves

Installation of ridge vents and soffit vents do the work for cold air to circulate very easily. Both the vents should have equal size of openings for about 1 square fit. Install baffles for the air to pass through easily without distracting by any object.

Seal the hatch

An unsealed hatch can be a reason for heat to trap inside the house. Cover the attic hatch with weather strips made up of foam with a foil in front of a board. These strips will be held strongly together with the help of an aluminum tape.


Exhausting through ducts outside

Remember all the ducts in a house which are connected to bathrooms, kitchen, and dryer vents should head outside the house. This should be done either by the roof or the wall, but not through the soffit.

Proper insulation

The right amount of heat is necessary to be stored inside and for this the floor of the attic should be insulated properly. To find out how much insulation is needed in your attic, check out the local building department near your locality. Old lights release more heat and cannot be insulated without boosting fire hazards. Change or replace them with IC fixtures, make sure they are sealed. These can be covered with insulation.


Seal the surroundings of chimney

The space between the chimney and the house should be sealed with a fire sealant in L shaped. Usage of foam or insulation is not safe from fire.

Seal all electrical penetrations

Electrical wires should be sealed and pipe vents with a fire sealant. Also check for spots where insulated wires are stained black with dirt.

Sealed and Insulated ducts

Install fiber reinforced masks around the HVAC of ducts. Wrap them properly with R5 and R6 fiber glass stick with a foil. Ice dams are natural and can be formed in extreme stormy weather, but with these precautionary steps the risk can be minimized. If your roof is Storm damaged in Ann Arbor Michigan and beyond repair then you need to get in touch with professional Roofing contractors for cost estimation of new roof. People who read this also like: Facts about corrugated metal roof What To Look In Roofing Company?

Related Services


Related Exterior Products

Post Response
Login to post your Comments